Argus 165 Manual Download Page 95

Page: 95 / 363

9 Virtual lines (VL)

ARGUS 165

Depending on the state of the physical layer, the virtual lines or the services, ARGUS



displays a variety of symbols in the status screen.



This service has not yet been assigned to a virtual line.



This service, VL or physical layer is idle.



This service is not available (bridge mode only).



Preparing activation of physical layer, VL or service.



Activating the physical layer, VL or service.



Physical layer, VL or service deactivated due to an unexpected occurrence.



Deactivating.



Synchronisation achieved (physical layer) or a VL or service was activated



successfully without errors.



A test is currently running in this service.

An error occurred here. Reset with

<Reset>

to continue with the VL/service.

9.2 Virtual line profiles (VL profiles)

The various profile types are explained below:

Profiles (1 - 20), see page 36:

VL profiles (virtual lines 1 - 20 )

PPP profiles (1 - 20)

These contain the assignments of the services (Data, VoIP, IPTV, VoD) to one or more
virtual lines.

In addition to the services, the settings for the bridge/router and the test parameters can
be found here as well.

Every profile can be assigned an individual profile name.

These contain the layer 2/3 settings.

VL profiles are assigned to services.

One VL can be assigned to multiple services.

The VL profiles can be assigned to PPP profiles.

These contain all relevant data for dialling.

PPP profiles are assigned to VL profiles.

One PPP profile can be assigned to multiple VL profiles.

Summary of Contents for 165












































































































































































































































































































































































Search results

Summary of Contents for 165

Reviews:

Related manuals for 165

Brands by name

Popular brands

Argus 165, Manual

Search results

Summary of Contents for 165

Reviews:

Related manuals for 165

Brands by name

Popular brands