Argus 165 Manual Download Page 64

Page: 64 / 363

7 Operation on xDSL accesses

ARGUS 165



By toggling the x-axis you can change its
labelling from tone to frequency.

Available options:



The zoom function and the cursor function
can also be combined.



However, the starting position of the cursor
can vary. The graph functions can be used
for all graphs.



Tone:

Displays the values of the



x-axis as tones.

Frequency:

Displays the values of the



x-axis as frequencies.

Direct setting of x-axis.

You can use the left and right
cursor to scroll through the
range (in this example
frequency).

Continued on
next page

Graphic functions

Summary of Contents for 165












































































































































































































































































































































































Search results

Summary of Contents for 165

Reviews:

Brands by name

Popular brands

Argus 165, Manual

Search results

Summary of Contents for 165

Reviews:

Brands by name

Popular brands