manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 54

7 Operation on xDSL accesses

54

ARGUS 165

7.3 ARGUS in access mode xTU-R

Determining the xDSL connection parameters using VDSL as an example

(procedures also apply for ADSL and SHDSL connections)

ARGUS is connected directly to the VDSL access via the supplied xDSL lead and the 
ARGUS socket line (either in front of or behind the splitter). In this case, ARGUS replaces 
the modem and PC. ARGUS establishes a VDSL connection and determines all relevant 
VDSL connection parameters. ARGUS displays the VDSL connection parameters and, if 
desired, saves them when the link is disconnected.

Use only the patch cable supplied with the device.

In this example, VDSL VTU-R mode is configured and selected as described in chapter „5 
Configuring accesses“ (see page 27).

socket

Line

VDSL access

VTU-C (DSLAM)

xDSL cable or patch cable 

The VDSL test has not yet been 
started: red LED in the display!

Meaning of LED image in display:

Red LED:

no test started

Yellow LED: test started

Green LED: connected

All further functions and 
procedures are explained using 
this status screen.

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands