manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 35

5 Configuring accesses

ARGUS 165

 

35

Sorting the accesses in the access overview

In order to keep frequently used accesses 
readily available, ARGUS allows you to 
arrange the configured accesses in any 
order. 

Switches to softkey assignment.

<Delete>

5.2 Phys. parameters

Edits the physical parameters of the 
selected access (here VDSL, see 
page 43).

The physical parameters can also be 
opened and edited directly when the 
access wizard is finished (see page 30 

Fig. 1).

Press one after 
another

 and 

 

Shortcut to access 
selection menu.

<

>

The selected access is 
moved down one place in 
the list.

<

>

The selected access is 
moved up one place in the 
list.

Deletes the highlighted 
access.

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands