manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 312

27 ARGUS settings

312

ARGUS 165

Date / time: 

To set the time manually, enter the correct time in your time 
zone using the ARGUS number keys. In automatic time set-
ting, ARGUS automatically reads the time from a preconfig-
ured time server.

Default: 

0.de.pool.ntp.org

This can be changed to a different server. The prerequisite is 
that ARGUS can connect to the internet. Carry out e.g. a ping 
test (e.g. ping www.argus.info).

The time you enter runs on the built-in ARGUS realtime clock until the power 
supply is interrupted. When ARGUS is switched off and the batteries 
removed, the clock continues to run for a few days on its internal buffer. The 
time is undefined as soon as the buffer is exhausted, and must be set again.

Management 
interface

Start 

management 

interface

Determines whether the management interface is used. If 
WLAN was selected as the management interface, ARGUS 
operates as a WLAN router, see page 313. 

Depending on the selected interface, ARGUS displays either 
a WLAN or an Ethernet symbol.

WLAN: 

WLAN is not active (gray)

            

 

WLAN is active (green) 

Ethernet: 

Ethernet is selected

Default: 

off

VNC server 

Start VNC  Determines whether the VNC server is used.

Default: 

off 

VNC 

scaling 

Determines the scaling used to display the 
ARGUS screen on the PC. 

Range: Factor 1 - Factor 4

Default: 

Factor 2

WLAN

When WLAN is grayed out, the management interface must 
first be halted (see above) by setting "Start management inter-
face" to off. Then restart it again.

SSID

The service set identifier (SSID) is a user-defin-
able name with which ARGUS can be identified as 
a network. Your SSID can also be displayed using 

the keyboard shortcut 

and 

 

Default: 

Argus165_SerialNumber 

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands