manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 281

23 Copper tests

ARGUS 165

 

281

23.5.4 Examples

The following signal forms can help you in interpreting the reflection responses that 
ARGUS displays.

Examples:

Open cable

The reflected pulse is positive. No proxi-
mate interference sources or the far end of 
the line can be seen. 




Short-circuit

The reflected pulse is negative. No proxi-
mate interference sources or the far end of 
the line can be seen. 




Mismatch

Different line cross-sections were used. 
The greater the mismatch, the greater the 
amplitude of the reflection.





Poor contact point

A poor contact between two lines distorts 
the reflection into an S-shape. The worse 
the contact, the greater the reflection.

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands