manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 275

TDR status display:

Gain:

Range:

23 Copper tests

ARGUS 165

 

275

ARGUS displays possible interference 
sources on the copper twisted pair 
directly.

In this example, after the input pulse 
(starting at 0 meters) we can see a second 
pulse that spikes at approx. 150 m. This 
can indicate a 150 m long line that is open 
at its end.

The adjustable range, the gain and the 
graph functions permit more detailed 

analysis.

To ensure optimum detection of pulse 
reflections, match the function for adjust-
ing the gain (y-axis) with the reduction/
enlargement of the range shown (x-axis).
ARGUS always starts with the lowest gain 
(-26 dB) at a range of 1500 meters.

 

Gain-Y: Sets the gain

from -26 dB, -20 dB, 0 dB, +14 dB 

+24 dB, +34 dB, +44 dB

The measurements with the TDR can take 
place in a measuring range of from 3.5 to 
6000 meters. The resolution is approx. 0.3 
% of the displayed measuring range. 

 

The accuracy is approx. ±2 % of the 
measuring range. When determining 
the distance, try to determine the 
start of a pulse where possible, and 
not the relative maximum.

Range-X: Sets the displayed 
measuring range. Every press of 
the cursor key halves or doubles 
the displayed range.

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands