manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 24

4 Quick-start guide

24

ARGUS 165

Charging the battery in initial operation

The battery pack compartment is on the rear of the device. Attach the battery back by 
placing it against the retaining points at the top end and then screwing down the knurled 
screw. Use only the battery pack supplied with the device. Observe the safety information 
given on page 15. Now connect your (switched-off) ARGUS to the external power supply 
supplied with the device.

Switch on ARGUS using the 

 key. The following display appears (you may first need to 

acknowledge warnings or messages with 

<Continue>

):

You must first change the battery pack supplied with the device completely (see page 322 
Status) before full capacity is reached.

Current assignment of the softkeys.

 Press

ARGUS indicates in the display when 
the battery is completely charged.

 Press: ends charging.

The Accesses display can vary 
depending on the configuration.

Selected

menu option 

Menu name

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands