manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 232

19 Parallel tests

232

ARGUS 165

Display during HTTP download:

Display of test status:

-

Current download/total number of 
downloads, in this example the first 
download attempt out of three (1/3) is 
displayed.

-

Current and overal Data transferred (in 
this example 6 % / 2 %)

-

Current net download rate (in this 
example 72,787 Mbit/s)

-

Current net average download rate (in 
this example 62,434 Mbit/s)

See page 150 for further result parameters.

Cancels test

-

Currently selected test as well as test-
dependent result parameters, in this 
example the current net download rate, 
the current progress and the size of the 
file to be transferred.

The display of results depends on the 
respective test. See the chapter on the 
individual test for more information on 
the result parameters.

-

The current download in kbit/s is 
represented as a percentage of the 
entire downstream range.

-

The current upload in kbit/s is 
represented as a percentage of the 
entire upstream range.

-

Number of CRC and FEC errors in down- 
and upstream

 

or

Switches to the test result 
parameters, in this example for HTTP 
download.

<Stop>

Stops the test, in this example 
HTTP download.

HTTP download

Cursor down

Test status

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands