manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 22

4 Quick-start guide

22

ARGUS 165

Top connections

PWR

For external power adapter.

When the external power adapter is connected, 
ARGUS switches off the battery power supply. 

USB-A or USB-A 1/2

USB-host interface 

(Active Probe II, Copper Box, WLAN, LTE)

USB-B (mini-USB)

USB-client interface (PC connection)

  Headset socket

ARGUS check regularly if there are any 
USB devices connected. 

Using the ARGUS socket cover with the rubber protective sleeve

 

First fit the rubber protective sleeve, then 
insert the socket cover in the two 
recesses in the sleeve provided for that 
purpose. 

The socket cover does not completely 
protect ARGUS against water or dirt 
penetration.

Open or remove the cover when using 
the device continuously over longer 
periods to prevent internal heat build-up.

Disconnect all connected devices before 
using the socket cover.

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands