manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 214

18 IPTV tests

214

ARGUS 165

Add the marked TV channel (in this 
example IPTV channel 4), then add the 
next channel (in this example IPTV 
channel 5).

Once at least two channels have been 
added to the list, you can change their 
position in the list using the following 
softkeys.

<Delete>

Deletes the marked TV 
channel from the list.

<Insert>

Opens the channel list with 
the available channels.

Toggles softkey assignment.

<

>

The selected channel is 
moved down one place in 
the list.

<

>

The selected channel is 
moved up one place in the 
list.

IGMP version

Version of the management protocol for joining/quitting a multicast 
group (for broadcast TV only).

Range: 2 to 3

Default: 

3

Continued on 
next page

Accepts the channel 
selection in the order shown.

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands