Argus 165, Manual

Page: 138 / 363

15 IP tests
138
ARGUS 165
Enter the IPv4 or IPv6 address as a
number. The editable area is highlighted in
blue. Enter the address using the number
keys.
<Delete>
Deletes the place in front of
the cursor.
to
When entering an IPv6
address, the letters A-F are
available using these key
combinations.
Adopts the marked IP
address as the default.
Toggle entry using the softkey (right
softkey changes the meaning when
pressed). Enters the address as name,
see user name page 105.
<Ab>AB>
Entry begins with upper-
case letters and continues
in lower-case.
<AB>12>
Entry of upper-case letters.
<12>ab>
Numerical entry.
<ab>AB>
Entry of lower-case letters.
or

Entry of special characters,
e.g. @, /, -, . or

_, :, ~, +, ...
Moves the cursor in the
display line
Number of pings
Enter the number of pings that ARGUS sends to the IP address.
When 0 is set ARGUS sends continuously until the test is cancelled
manually. Range: 1 to 99999

Default: 10
Pause
Defines a pause between two test packets.

Range: 0.1 - 9.9 seconds

Default: 1 second
Packet size
Sets the size of the test packet.

You can determine the maximum packet size and the response time
as as function of size by varying the packet size.

Range: 36 to 55,555 bytes

Default: 84 bytes
IP address as IPv4 number
IP address as IPv6 number
You can use square brackets to
include port information with IPv6
addresses in "IP address as
name".