9 Virtual lines (VL)
ARGUS 152
87
TPID:
Tag Protocol Identifier
The TPID is a 16-bit sub-field within the 4-
byte VLAN data field. This field contains the
tag information defined by IEEE 802.1q.
Default:
VLAN 1:
8100 hexadecimal
VLAN 2:
88A8 hexadecimal
Note:
When using two VLANS with layer 3 (IP) or
layer 4, both are to be set to 8100.
PPP profile:
User name
Entry of the user name assigned by the
carrier:
The user name is entered using the number
keys. Pressing the right softkey changes the
meaning and thus influences the input via
the number keys (letters (upper and lower
case) and numbers).
Password
Entry of a password (max. 55 characters) assigned by the carrier;
see "User name" for an explanation.
During entry, the characters of the password are visible until Enter
is pressed once. The characters are subsequently only displayed
encrypted with "*".
Set IP
When "yes" is set, the IP address defined under IP/own IP address
(see below) is used for connecting.
Default:
no
Current delay
Once a PPP connection has been established, the test is only
started after the preset delay time has elapsed.
Range: 2 - 10 seconds
Default:
2
Profile name
Enter the name of the PPP profile.
