manualshive.com logo in svg

Argus 152, Manual

Share
Download
Argus 152 Manual Download Page 158

15 VoIP tests

158

ARGUS 152

ARGUS displays the SIP commands in 
the service VoIP.

For more information ((s. chapter I) VoIP 
SIP status codes page 389).

ARGUS can be called while the service 
VoIP is active. An incoming call is 
indicated by the yellow CALL symbol. The 
call can be accepted or refused.
For automatic call acceptance, you need 
to start the specific test "VoIP wait", see 
page 162.

<Time>

Puts a timestamp on all events.

The timestamp uses the ARGUS-
internal system time, see page 356.

<Reject>

Refuses the call.
Switches to status screen.

<Accept>

Accepts the call.

Switches to ARGUS status.

Incoming call:

Summary of Contents for 152

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands