Argus 145 Plus Manual Download Page 76

Page: 76 / 361

7 Operation on a VDSL Access

ARGUS 145

PLUS

7.2 VDSL Settings

The ARGUS stores all of the settings required to run a test on a VDSL access in profiles.

Up to 10 user-defined profiles can be created. A specific profile can be selected before a

VDSL connection is setup or a test performed, otherwise the ARGUS will use the default

(preset) profile. Only those settings which are relevant will be used for the respective test

situation. The default (factory) settings can be restored at any time (see page 338). The

procedure for changing a setting will be illustrated with a single example:

ARGUS – status display

The ARGUS - Main menu

Select "Settings"

Mark “Profiles”

Continuation on

Summary of Contents for 145 Plus










































































































































































































































































































































































Search results

Summary of Contents for 145 Plus

Reviews:

Brands by name

Popular brands

Argus 145 Plus, Manual

Search results

Summary of Contents for 145 Plus

Reviews:

Brands by name

Popular brands