PT-90 Mobile Computer SDK Programming Manual
152
SetWorkingType
Set RFID module working type with different tag type, and this function should be called before read card.
int SetWorkingType
{
int
iType
,
int
iHalfPower
}
Parameters
iType
[in] The RFID module working type. This parameter must be one of the values in the table below.
Value
Working type
1
15693
2
14443A
3
14443B
iHalfPower
[in] The RFID module power type. This parameter must be one of the values in the table below.
Value
Power type
0
full power
1
Half power
Returned Values
Returning zero if the operation is successful, otherwise, indicates failure.
Example
if(SetWorkingType(1,0) != 0)
AfxMessageBox(_T("Set working type fail"));
Requirements
OS Versions:
Windows CE 6.0 or beyond.
Header:
RFID.h
Link Library:
RFID.lib
Link DLL:
RFID.dll
Device:
PT90
