Argox CP-2140Z, User Manual

Page: 40 / 84

40
Compact Printer Series - User
’s Manual
LED Indicators: Power and Ready LEDs blink alternately
Power LED Ready LED
ON OFF
OFF ON
Possible Problems Solutions Remarks
Ribbon out Install a new
ribbon roll
Set “Direct Thermal”
printing by driver or
commands if no ribbon is
required.
LED Indicators: Only the Power LED blinks
Power LED Ready LED
ON ON
OFF ON
Possible Problems Solutions Remarks
Serial IO error Check serial baud rate at
both of your system and
the printer. For serial
interface only
Cutter has failed, or
there is paper jam
inside the cutter. Check the cutter or
recover paper jam. Only applicable
when cutter
mode to cutter
mode.
Other possible
hardware errors. Contact the reseller for
further service.