manualshive.com logo in svg

Argos Atlas 145/7229, Assembly Instructions Manual

Share
Download
Argos Atlas 145/7229 Assembly Instructions Manual Download Page 1

MADE IN 

BRITAIN 

Dimensions

Assembly Instructions -

 Please keep for future reference

If you need help or have damaged or missing parts, call the 

Customer Helpline: 08456 400800

Issue 4 - 04/09/14

Important -

 Please read these instructions fully before starting assembly

ALR2956

147/1999

157/6760

145/7229

Atlas - 

Triple Robe Carcass

Width - 150cm

Depth - 59.5cm 

Height - 212.5cm

Issue 2 - 15/01/14 - Note added at Steps 2 and 3 “Please ensure you have your panel in exactly the
same orientation as the picture above and use the 2 inside holes for screws B as shown in the picture”.

IMPORTANT

The unit MUST be fixed to a wall using 

both of the brackets supplied.

There is the option of 

purchasing an Internal 3 

Drawer Chest that can be 

placed inside your Robe

Issue 3 - 06/02/14 - The holes for the front feet have come forward by 32mm to improve stability.
Overbalance Bracket and Screw increased to 2.
Note added at Step 21 to emphasise the unit must be fixed to a wall and must be level and square.

Issue 4 - 04/09/14 - Changed the Round Back Holders to Oblong Back Holders.

Summary of Contents for Atlas 145/7229









































Reviews:

No comments

Brands by name

Popular brands

Load more brands