Argos 603/1822 Assembly Instructions Download Page 1

Width - 45cm

Depth - 51cm

Height - 94cm

Important

– Please read these instructions fully before starting assembly

 Customer Helpline: 08456 400800

Dimensions

Issue 1 - 9/02/10

Cross Back Chair

If you need help or have damaged or missing parts, call the

7

c:

d:

c:

   

  After the sitting test, 

re - tighten bolts again,

if any adjustment needed.

 

d:

    

 It is highly recommend 

to re - tighten all the bolts

again after using the chair

for 7 days.

 

Note :

 

Please keep the 

allen key to re - tighten

all bolts again when 

required.

Assembly Instructions

If you need help or have damaged or missing parts, call the

 Customer Helpline: 0845 6400800

Assembly is complete.

603/1822

Assembly Instructions

- Please keep for future reference

603/3837

603/3820

Summary of Contents for 603/1822

Page 1: ...fter the sitting test re tighten bolts again if any adjustment needed d It is highly recommend to re tighten all the bolts again after using the chair for 7 days Note Please keep the allen key to re tighten all bolts again when required Assembly Instructions If you need help or have damaged or missing parts call the Customer Helpline 0845 6400800 Assembly is complete 603 1822 Assembly Instructions...

Page 2: ...nit or your floor Parts of the assembly will be easier with 2 people We do not recommend the use of power drill drivers for inserting screws as this could damage the unit Only use hand screwdrivers Dispose of all packaging carefully and responsibly Only clean using a damp cloth and mild detergent do no use bleach or abrasive cleaners From time to time check that there are no loose screws on this u...

Page 3: ... 2 Fron leg frame x 1 3 4 Side rail x 2 L R 5 c Assembly Instructions d d c Stand the chair on a floor Insert bolts with spring washers and washers through side rails holes into front leg frame screw all bolts by using ball allenkey 3 A F B C Right side rail Left side rail Place the seat pad on the table Put the chair frame on top of the seat back 2 A B C 1 3 4 4 2 BACK BACK ...

Page 4: ... supplied than are required Bolt x 8 B Spring washer x 8 C D Washer x 8 F Lock seat x 2 Ball allenkey x 1 A E Screw x 4 b Attach left and right side rails onto the chair back with bolt spring washers and washers by using ball allenkey as shown in the figure B C F Do not fully tighten Fit the front leg frame onto the side rails 3 4 3 4 4 1 pre drilled hole Right side rail Left side rail BACK A B C ...

Reviews: