7
E-117 TRI+: 5. Seat Post Installation
B
A
C
1. Unscrew main bolt (A) as far as
possible without fully removing from
the lock nut.
2. Install the saddle rails into the
seatpost clamp (B).
3. Slide saddle clamp (B) onto rocker (C).
4. Tighten the bolt up at 12Nm.
See p.23 for saddle adjustment.
IMPORTANT:
The E-117 Tri+’s saddle rail clamp is
made for aluminum and round-shaped
saddle rails (Ritchey’s WCS Alloy 1-Bolt
Clamp Kit - Part #: 55055467004).
For other types of saddle rails, please
refer to the Tips and Troubleshooting
section of this Assembly Guide (p.24).
12Nm
GRIP PASTE
GRIP PASTE
5Nm
5Nm