Subject to change · 33143400 · 05.2016 · EN
Page 8
www.argo-hytos.com
3. General instructions
For prevention of material damage and product damage
CAUTION
Danger due to improper handling
Property damage
The filter unit may only be used in accordance with Section 2.2, “Intended use”.
Leakage or spillage of hydraulic fluid
Environmental pollution and ground water contamination.
Use an oil binding agents in order to bind leaked hydraulic oil.
Risk of burns
Contact temperatures according to DIN EN563 (3) and DIN EN13202 (4) may be exceed during operation.
Allow the filter unit to cool down before touching it.
Contamination due to fluids and foreign bodies
Premature wear - malfunction - risk of damage - property damage.
Ensure cleanliness during installation in order to prevent foreign bodies, such as welding beads or metal
chips, from entering the hydraulic lines, leading to premature wear or malfunction.
Make sure that connections, hydraulic lines and attachment parts (e.g. gauges) are free of dirt and chips.
Prior to commissioning, check that all hydraulic and mechanical connections are connected and tight,
and that all gaskets and seals of the plug connectors are correctly assembled and undamaged.
For removal of lubricants and other contaminants, use residue-free industrial wipes.
Make sure that all connections, hydraulic lines and attachment parts are clean.
Ensure that no contaminants enter when closing the connections.
Make sure that no detergents enter the hydraulic system.
Do not use cotton waste or faying cleaning rags for cleaning.
Do not use hemp as sealing agent.
Improper cleaning
Premature wear, malfunctions! Risk of damage! Property damage.
Close all openings with appropriate protective fittings to prevent penetration of detergents.
Do not use aggressive cleaning agents for cleaning. Clean the product with a suitable cleaning fluid.
Do not use a high pressure cleaner.
Do not use compressed air to clean function interfaces such as seal areas.
