Subject to change · 33143400 · 05.2016 · EN
Page 13
www.argo-hytos.com
7. Assembly
WARNING
Faulty power supply
Risk of death and injury
Always consider the country-specific regulations.
Let - prior to commissioning - an electrician check whether:
›
the mains voltage matches with the voltage specified on the typeplate of the motor,
›
the power source has appropriately been secured,
›
the cross-section is of sufficient size,
›
cable and connection to the power source are in perfect condition.
With 3-phase AC motors check after connecting that:
›
when switching on, the direction of rotation matches with the direction arrow on the motor, if not, have it changed by an
electrician.
Specifically, proceed with the following steps:
›
Connect the 230 V voltage plug to the local power supply.
