Page 2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
P RODUCT TO RAIN OR MOISTURE
Audio Resource Group products are engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. To ensure your safety and prolong the
service life of your equipment, please read the following precautions and all collateral materials carefully
before using the product.
1.
Read and keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this device near water. Do not place objects filled with liquids, such as water bottles
or drink containers directly near or on equipment.
5.
Protect power cords from being walked on or pinched: especially at plugs, convenience
recep
tacles, and the device’s exit point.
6.
Only use attachments/accessories specified by the manufacturer.
7.
Unplug devices from wall outlets during lightning storms or when not in use for long periods of
time.
8.
Do not attempt to service the devices yourself. Please contact Audio Resource Group, Inc.
directly for maintenance, repair, or replacements.
HEARING SAFETY
CAUTION!
Many of ARG’s products are designed to amplify sounds to a high volume level which could potentially
cause hearing damage if used improperly. To protect your hearing and the hearing of others:
1.
Set the volume level at the minimum setting, then place the listening accessory (headphones,
earphones or ear buds) on your ears and finally adjust the volume to a comfortable level.
2.
If feedback (a high-pitched squealing sound) occurs, immediately move the receiver away from
the transmitter and reduce the volume level.
3.
Do not allow children or other unauthorized persons access to this product.
RECHARGEABLE BATTERIES
The TX900M transmitter and RX900M receiver uses a lithium-ion rechargeable battery. Please use the
single power adapter or multi-slot charging tray provided with the devices to charge the transmitters and
receivers. Using smart charging circuitry, the transmitters and receivers will be fully charged in a
maximum of 2 hours. Following a 2 hour charge, the batteries are designed to operate the TX900M
transmitter for approximately 16 hours and a RX900BM receiver for 25 hours. Batteries MUST BE
CHARGED for a complete cycle before the first use.
To charge a single transmitter or receiver using the single power adapter, insert the charger plug into the
5V/DC Input on the bottom of the unit. To use the drop-in charging tray, plug in the power supply for the
tray and insert each transmitter and charger into the tray, making sure that the 5V/DC Input plug of each
unit securely fits the charging post in the tray. The LED will turn red indicating the unit is charging; the
unit is fully charged when the red LED turns off.
