background image

Troubleshooting 

1)

 

When there is STATIC INTERFERENCE or NO SOUND, please go through the following 
procedures to eliminate the problems. 
a.

 

Make sure that the transmitter and receiver are set on the same channel. 

b.

 

Check the Mute setting on the transmitter. 

c.

 

Check whether two transmitters are set at the same channel. Avoid two transmitters to 
be on the same channel. 

d.

 

Sound level on the line input source may be too high. 
 

2)

 

When a NOISY SOUND occurs, please go through the following procedures to eliminate the 
problems. 
a.

 

Make sure that the transmitter and receiver are within the distance range. 

b.

 

Make sure that the sound level on the transmitter and audio sources are set at a 
reasonable level. 

c.

 

Try changing the transmitter to a different frequency to see if the sound quality 
improves. 
 
In case the problem persists, please consult your dealer or ARG. 
 

Repairs 

In the event that there is need for a repair, please contact your dealer or ARG for a Return 
Authorization. 
 
 
 

Technical Specifications 

Frequency Range: 72.1-72.9MHz, 74.7MHz, 75.3 – 75.9MHz 
Modulation: Wide-band FM, 75 kHz pk 
Frequency Response: 200Hz to 13KHz, ±3 dB at 1% max. THD 
SNR: 70dB (typical) transmitted 
 
72MHz Mini Transmitter 
Audio Input: 3.5mm mono Mic /Line   
Power consumption: 3.7V40mAH 
Operation hours: 15 hours   
Charging time: 3 hours, smart charging 
Weight: 35g 
 
 
 
 
 
 
 

Summary of Contents for ARG-TX72M






Reviews: