Original User Manual
–
A
REBO
S SPA Pool
12
3.3 Installation of LED lights (where applicable)
•
SPA pool type without LED lighting kit please direct to 3.4;
•
The LED lighting kit is in delivery and suitable for type:
CORFU PALMA TENERIFE
SANTORIN BALI MONACO
•
Check the scope of delivery for remote control, power cable, connection cable and LED-roll.
•
After the spa is completely inflated, turn it “upside down”. Unroll the LED
-strip completely.
Pass it through the tabs at the bottom of the pool, starting at the control unit.
•
The
electrical connection
is made by the power supply unit and connecting cable. Pay
attention to the groove in the plug.
•
Different colors, brightness and modes can be selected with the
remote control
.
CAUTION! Make sure Lighting is NOT tight between the loops.
They must be fitted loosely
, with excess LED to move between the retention loops on the base
of the hot tub.
This reduces stress on the strip and allows the lighting strip expand when filled with water.
Middle:
Receiver Remote
control
Left:
black connection to
power supply (2-pin plug)
Right:
transparent
connection to the pool (4-
pin plug)
Make sure that the LED-
lamps face the base of
pool.
