User’s M
anual
–
A
REBO
S Gasoline leaf blower and vacuum
13
•
Pull the pull-wire starter until the motor starts.
5.4 Setting the engine idling speed:
•
Start the engine.
•
Run the engine at idle until the operating temperature is reached. (approx. 2-3 minutes)
•
Use a screwdriver to set the engine idle speed to
•
3000 ± 200 rpm.
•
Turn the idle adjustment screw (4) clockwise to increase the engine idle speed.
•
Turn the idle adjustment screw (4) counterclockwise to decrease the engine idle speed.
5.5 Stopping the engine
•
Release the throttle.
•
Cool the engine by running it idle for 2 to 3 minutes.
•
Stop the engine by pressing the ON/OFF switch.
6. Technical data
Model
AR-HE-BLBS26
Engine power
700 W
Idle speed
3000±200 U/min
Cubic capacity
34 mm
Engine type
1E34FNN
Carburetor
Diaphragm primer pump
Type of ignition
CDI
Fuel tank capacity
0,5 L
Mixing ratio (fuel/two-stroke oil)
1:50
Guaranteed sound power level
112 dB (A)
Spark plug
RCJ6Y
Rated power (KW/ rpm)
0.65/7500
Weight (empty tank)
4,3 kg
7. Commissioning
•
The machine is not delivered filled with fuel mixture.
•
Fill the device as described in this chapter under "Refueling".
•
The device is fueled with a 1:50 mixture of normal petrol (lead-free) and
two-stroke engine oil.
•
When handling petrol, increased attention should be paid. Avoid smoking and open fire due
to the risk of explosion.
7.1 Gasoline and engine oil to be used
Petrol: octane rating at least 90 RON, unleaded
•
Do not fill with leaded petrol, diesel or other non-approved fuels.
•
Do not use petrol with an octane rating lower than 90 RON. This can be caused by increased
engine temperatures lead to engine damage.
•
If you work permanently in a higher speed range, use gasoline with a higher
octane number.
