Front & Rear View
Specification
Package Contents
Front
Back
Distance
indication
Short Distance
Power off
Buzzer
Battery cover
Hanging hole
for strap
Clip
Search
KiD Tracker User Manual
- Parent’s unit
Front
Back
Model Name
405K
Parent’s Unit
Kid’s Unit
1 pc
Batteries
LR44x2
CR2032x1
User manual
Strap
3
2
2
1
405K2
2 pc
LR44x2
CR2032x2
Suggested Setting place
Parent’s Unit
Kid’s Unit
Long Distance
Search button 2
for Kid’s unit 2
(Also served as
unmute button for
Kid’s unit 1)
1
3
3
2
1.For the first time use, please insert the batteries into the Parent’s unit and the Kid’s unit according to the battery
installation instruction as follows.
1. For Master unit: Slide out the battery cover.
For Slave unit: Take off the battery cover
by coin.
2. Insert batteries (included) following
the polarity markings in the battery
compartment.
3. Close the battery compartment cover
as shown.
Direction Indicator
(Also served as
Status Indicator for
Kid’s unit 2)
working range 0~500m/1640ft (line of sight)
(the distance may be short depends on the
terrain environment )
Search Tip:
a.) Kid Tracker might experience interference & loss of signal strength in crowded location such as busy shopping mall,
amusement park . It is important to teach kids to go to an open area and stay there until their parents show up.
b.) While searching, always place the parent’s unit in front of your chest and turn around your body slowly to find the
correct direction. If you point at the correct direction, both status LEDs will be lit and blinking.
c.) If the distance between the Parent’s unit and the Kid’s unit is out of detectable range, the Parent’s unit beeps every
second to remind you.
d.) While searching, the Kid’s unit makes a 95db beep sounds every second. This can assist you in finding its position
by tracking the sound when the Parent’s unit and the Kid’s unit are nearby.
.
One Kid’s unit only: To search the Kid’s unit, please press the "Search button 1" on the Parent’s unit once.
Two Kid’s units: To search the Kid’s unit 1, please press the "Search button 1" on the Parent’s unit once.
To search the Kid’s unit 2, please press the "Search button 2" on the Parent’s unit once.
Cinnection Status
1 pc
1 pc
Kid's unit Jacket
Once you press the "Search button" on the Parent’s unit, the signal status, right and left LED on the Parent’s unit will
start to blink (which tells you the parent’s unit is linking to the kid's unit now). Same as the signal strength LEDs on
the Parent’s unit, which indicates distance, will start to blink at the same time.
After you press the search button, sway the parent unit at a slow speed from your right side to left side, then reverse
from left side to right side twice to collect signal strength from all directions. After second you sway, the parent unit to
the correct direction, both (left and right) status LEDs will be lit and start blinking. You can move forward to search for
your kid now.
The closer the distance is between the Parent’s unit and the Kid’s unit, more signal strength LED lights are lit and the
melody on the Parent’s unit will become more rapid. Contrarily, less LED lights are lit and the melody on the Parent’s
unit becomes slower. Press the "Search button" on the Parent’s unit again to stop searching.
Holding Way
*** Do not cover the top side of Parent’s unit
r.
Correct
Holding
Wrong
Holding
During Search
Correct
Holding
*** Do not sway Parent’s unit. Parent’s unit is always in front the body when take a turn.
.
Press and
release
Parent’s Unit
Kid’s Unit
- Kid’s unit
2. Switch the power button of the Parent’s unit and the Kid’s unit to “ON”, it will enter ”Search Mode”, please press
search button 1 or 2 to enter ”Standby mode”.
3. Place the Kid’s unit onto your kids, and take the Parent’s unit with you or clip it on your belt.
Direction Indicator
(Also served as
Status Indicator
for Kid’s unit 2)
Search button 1
for Kid’s unit 1
(Also served as
unmute button for
Kid’s unit 2)
Connection Status
Hanging Hole
Power On
Power Off
Battery
Cover
Page 1
Page 2
Model Name
Function
Search Range
Alarm Distance
Parent’s Unit / Kid’s Unit
Parent (M05AM)x1
Kid (S04A)x1
Parent (M05AM)x1
Kid (S04A)x2
Battery Type
LR44
CR2032
LR44
CR2032
Battery Life Time with Standby
20 days (8 hrs)
20 days (8 hrs)
30 days (8 hrs)
30 days (8 hrs)
Battery Life Time with Sleep
60~90 days
60~90 days
60~90 days
Beep Sound (at 10cm/3.9inch)
95 db
95 db
95 db
95 db
Vibration Motor
Vibration Motor
Dimension (L/W/H)
52.8x39x13.2mm
2x1.6x0.52inch
405K ( 1 to 1)
Search & Alarm
Search & Alarm
405K2 (1 to 2)
0~500m/1600ft
0~500m/1600ft
Short Distance : 10±5m/33±16ft
Long Distance : 55±5m/180±16ft
Short Distance : 10±5m/33±16ft
Long Distance : 55±5m/180±16ft
60~90 days
Virbration
Diam 45xW 12mm
Diam1.77x0.47inch
Diam 45xW 12mm
Diam1.77x0.47inch
52.8x39x13.2mm
2x1.6x0.52inch
None
None
KiD Tracker User Manual
