23
ENGLISH
wheelchair on the rear wheels in order to complete the descent
WARNING!
We recommend to use this method only in presence of obstacle lower than 10 cm!
10.4 Use the armrest
The armrest can be flip back, detachable or flip back and detachable
Flip back - this feature is useful when you have to get in or out of the wheelchair.
Push the release lever then turnover the armrest
10.5 Use the 30cm wheels
The rear 30cm wheels (model CP735-xx and CP745-xx) are used when wheel choir is driven by
an assistant through the handles.
10.6 Use the 60cm wheels
The rear 60cm wheels (model CP740-xx) and 55 cm (model CP750-xx and CP760-xx) are used
when self-propelled. Hold the handrail on the wheel and push it in direction required.
10.7 Use of small wheels for narrow passages
This type of wheels are used for a short transfer of the wheelchair in particularly narrow
spaces (for example the doors of an elevator). To use these wheels is necessary to lift the
wheelchair, press the button in the center of the wheel and pull outward.
To enter them again simply align the shaft of the wheel with the hub bore on the frame and
push inward until proper locking safety clip. (Figure 10).
(FIG.10)
10.8 Use of the brakes
The large rear wheels are equipped with mechanical brake handed use. To lock the wheels
grip the actuating lever and push it forward.
To unlock the wheels push the actuating lever in the opposite direction.
10.9 Carrying
The wheelchair has been designed to be easily carried.
Once the armrest and the footrest are removed, can be closed and easily positioned in the
car boot, for example. If this can’t be possible, position the wheelchair in front of the car rear
seat so that it is stable and cannot slip or slide. Lock the wheelchair with the seatbelt
11. MAINTENANCE
The ARDEA ONE devices by Moretti are checked carefully and supplied with EC mark, once laun-
ched on the market. For patient and physician’s safety we recommend to let check the device by
the manufacturer or by laboratory authorized every 2 years. In case of repair use only original spare