Arctiko CRYO 170, Operating Instructions Manual, Page: 34 / 40

33
Moving and Reinstalling the Freezer
When you need to move the appliance, consult your sales agency or
qualified experts. Imperfect reinstallation may cause electroshocks or fire.
When you need to move the appliance, make sure not to tilt it or let it fall
over. Failure to follow these instructions may lead to personal injury and/or
property damage.
When you need to move the appliance, pull out the power plug from the
outlet, taking care not to damage the power cord. Damage to the cord may
lead to electric shocks or fire.
Before moving the appliance, remove all stored materials from the freezer.
When you need to move the appliance, do not lay it on its side, since this
may became a cause of a breakdown.
Power cut
• Limit door opening as much as possible.
• Do not put any new materials into the freezer. It will make the inside
temperature higher.
Turning off the appliance for long periods
• Clean the inside of the freezer and leave the doors open for 2~3 days
until the inside is completely dry in order to avoid mold or unpleasant
odors.
Repair of scratches on the painted surface
If you leave the damage as it is, rust will occur. Take action immediately.
(Simple measures)
• Seal a small damaged area.
• Cover with a waterproof wall paper for a big damage area (remove any
rust with sandpaper).
Disposal of the appliance
• Remove the door hinges and the gasket.
• Do not leave the appliance in a place to which children have easy access.
• Contact a qualified scrap merchant for disposal.