3-23
3
DSC02217
6. Install two O-rings, one alignment pin, and the
oil pump on the right-side crankcase half; then
secure with three cap screws tightened to speci-
fications.
DSC02224
DSC02226
7. Install the oil pump sprocket with the nut.
Tighten the nut to specifications.
DSC02227
8. Install the right-side crankcase cover seal with a
seal driver or socket. Apply a light coat of
grease around the oil seal lip.
DSC02230
DSC02232
9. Install a new gasket and two dowel pins on the
right-side crankcase half.
NOTE: The two contact surfaces must be clean
before installing the gasket.
10. Install the eight cap screws to the right-side
crankcase cover. Apply red Loctite #271 on the
cap screws and tighten to specifications.
NOTE: Note the correct position for the differ-
ent-lengthed cap screws that they are installed in
the proper locations.
! CAUTION
Take care that the locating pin (small pin) and the
alignment pin (larger bushing) engage the oil pump
and crankcase properly or damage to the engine will
occur.
! CAUTION
Take care that the flat in the oil pump sprocket hub is
aligned with the flat on the oil pump shaft or damage
to the sprocket and shaft will occur.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
