8-22
A-Arms (Bearcat/F-Series/
T-Series)
REMOVING UPPER ARMS
NOTE: For installing purposes, note the position of
the axle shoulders.
ZJ168A
1. Elevate the front of the snowmobile with a suitable
safety stand or lift.
2. Remove the cap screw and lock nut securing the
upper arms to the spindle. Account for the spindle
axle.
3. Remove the cap screw and lock nut securing the
front upper arm to the chassis; then remove the cap
screw and lock nut securing the rear upper arm to the
chassis. Account for the axles.
INSPECTING
1. Inspect the arm welded areas for cracks or any signs
of deterioration.
2. Inspect the bearings and axles for wear or damage.
3. Inspect the arm tubing for signs of twisting or bend-
ing.
INSTALLING UPPER ARMS
1. With the axles properly installed as noted during
removing, install the front and rear upper arms to the
chassis; then secure the arms with the cap screws and
lock nuts. Tighten to 32 ft-lb.
2. With the axle installed in the spindle, secure the
upper arms to the spindle with the cap screw and
lock nut. Tighten to 32 ft-lb.
REMOVING LOWER A-ARM
NOTE: On the F5 LXR to remove the lower A-arms, it
will be necessary to remove the air silencer. Proceed
to Air Silencer (F5 LXR) sub-section in Section 3 and
follow REMOVING procedure.
1. Elevate the front of the snowmobile with a suitable
safety stand or lift.
2. Remove the cap screw and lock nut securing the
shock absorber to the spindle; then remove the shock
from the spindle and account for the shock sleeve.
3. Remove the four torx-head cap screws securing the
lower A-arm retainer to the spindle; then remove the
cap and lower arm from the spindle.
ZJ174A
4. Secure the upper arms and spindle out of the way.
0744-929
5. Remove the cap screws and lock nuts securing the
lower A-arm to the chassis; then remove the arm
from the sway bar and chassis and account for the
axles and sway bar link.
NOTE: For installing purposes, note the position of
the axle shoulders.
ZJ168A
6. If applicable using a flat-blade screwdriver, pry the
split bearings from the spindle axle of the A-arm.
CAUTION
Never use the front bumper to support the front of the
snowmobile off the floor.
Summary of Contents for Sno Pro 120
