background image

2

Foreword

Congratulations! You have chosen a quality Arctic Cat Snowmobile designed and

assembled to give dependable service. Be sure, as the owner/operator of an Arctic

Cat Snowmobile, to become thoroughly familiar with its basic operation, mainte-

nance, and off-season storage procedures. Read this manual and the accompanying

Snowmobile Safety Handbook before operating the snowmobile to learn safe and

proper use of your new Arctic Cat Snowmobile. Always operate the snowmobile

within your level of skill and current terrain conditions.
This manual covers operator-related maintenance, operating instructions, and off-

season storage instructions. If major repair or service is ever required, contact an

authorized Arctic Cat Snowmobile dealer for professional service.
At the time of publication, all information and illustrations were technically cor-

rect. Some illustrations used in this manual are used for clarity purposes only and

are not designed to depict actual conditions. Because Arctic Cat Inc. constantly

refines and improves its products, no retroactive obligation is incurred.
This Operator’s Manual should be considered a permanent part of the snowmobile

and must remain with the snowmobile at the time of resale. If the snowmobile

changes ownership more than once, contact Arctic Cat Inc., Service Department,

P.O. Box 810, Thief River Falls, MN 56701, for proper registration information.

This manual was prepared by the Product Service and Warranty Department of

Arctic Cat Inc.
Every Arctic Cat Snowmobile meets or exceeds the standards of the Snowmobile

Safety and Certification Committee and displays the SSCC decal. Arctic Cat Inc.

endorses and encourages the safe use of all snowmobiles. Always wear a helmet

and eye protection. Drive with caution, observe all state and local regulations, and

respect the rights of others. International Snowmobile Manufacturers Association

(ISMA) 

members like Arctic Cat do their part to improve trails, sponsor events, and

generally support the sport of snowmobiling. As a member of the National Snow-

mobile Foundation, Arctic Cat Inc. promotes snowmobiling through education,

charity, and research programs.

© 2020 Arctic Cat Inc.

Printed in U.S.A.

Summary of Contents for 2262-967



















































Reviews: