Arctic Cat 2012 700 i Cruiser Operator'S Manual Download Page 531

Page: 531 / 708

Main TOC

Section TOC

N ext

YOUR ATV CAN BE HAZARDOUS TO

OPERATE.

A collision or rollover can occur quickly,

even during routine maneuvers such as

turning and driving on hills or over obsta-

cles, if you fail to take proper precau-

tions.
For your safety, understand and follow all

the warnings contained in this Operator’s

Manual and the labels on your ATV.
This Arctic Cat ATV Operator’s Manual

should be considered a permanent part of

the ATV and must remain with the ATV

at the time of resale. If the ATV changes

ownership more than once, contact Arctic

Cat Inc., Service Department, P.O. Box

810, Thief River Falls, MN 56701, for

proper registration information.

FAILURE TO FOLLOW THE WARN-

INGS CONTAINED IN THIS MAN-

UAL CAN RESULT IN SERIOUS

INJURY OR DEATH.
Training is available: U.S. owners, call

800-887-2887; Canadian owners, call

613-739-1535.
Un cours d’instruction est disponible:

pour les propriétaires canadiens, com-

posez le 613-739-1535.
Particularly important information is dis-

tinguished in this manual by the follow-

ing notations:

California Proposition 65

The Safety Alert Symbol means ATTENTION!
BE ALERT! YOUR SAFETY IS INVOLVED.

WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.

! WARNING

CAUTION, without the safety alert symbol, is
used to address practices not related to per-
sonal injury.

CAUTION



NOTE:

A NOTE provides key information to make pro-
cedures easier or more clear.

! WARNING

This product contains or emits chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.

2012 Generic ATV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Brands by name

Popular brands