Arctic Cat 2012 700 i Cruiser Operator'S Manual Download

Page: 437 / 708

Main TOC

Section TOC

N ext

Preparation After Storage

Taking the ATV out of storage and cor-

rectly preparing it will assure many miles

and hours of trouble-free riding. Arctic

Cat recommends the following procedure

to prepare the ATV.

1. Clean the ATV thoroughly.
2. Clean the engine. Remove the cloth

from the muffler.

3. Check all control wires and cables for

signs of wear or fraying. Replace if

necessary.

4. Change the engine oil and filter.
5. Check the coolant level and add prop-

erly mixed coolant as necessary.

6. Charge the battery; then install. Con-

nect the battery cables making sure to

connect the positive cable first.

7. Check the entire brake systems (fluid

level, pads, etc.), all controls, head-

lights, taillight, brakelight, and head-

light aim; adjust or replace if

necessary.

8. Check the tire pressure. Inflate to rec-

ommended pressure as necessary.

9. Tighten all nuts, bolts, cap screws,

and screws making sure all calibrated

nuts, cap screws, and bolts are tight-

ened to specifications.

10. Make sure the steering moves freely

and does not bind.

11. Fill the fuel tank with clean diesel

fuel of the recommended grade.

2012 700 Diesel

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands