manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

32

Previous

Main TOC

Section TOC

Next

ATV Operation

.

Active riding and basic maneuvers are

the foundation of your ATV ride. Without

basic skills, it’s impossible to move to

this level— active riding. These are your

basic maneuvers:

• Mounting the ATV
• Starting the Engine
• Starting a Cold Engine
• Shifting
• Braking/Stopping
• Parking
• Dismounting the ATV

Mounting the ATV

1. From the left side, grab the left-side

handlebar and apply the hand brake;

then put your left foot on the foot-

rest.

2. Grab the right-side handlebar.
3. Swing your leg over the seat and set

your right foot down on the right-

side footrest.

4. Get seated in a comfortable position.
5. Always keep your feet planted on

the footrests.

Starting the Engine

Always start with the ATV on a flat, level

surface. Carbon monoxide poisoning can

kill you, so keep your ATV outside while

it’s running. Follow these steps to start it

up:

1. Ensure that the fuel valve is in the

ON position.

2. Mount the ATV and sit down.
3. Compress the hand brake; then

engage the brake lever lock.

4. Shift the transmission into neutral.
5. Turn on the ignition.
6. Move the choke lever to the engaged

position if starting the engine cold

(if it’s already warmed up, you

shouldn’t need to use the choke at

all).

7. Move the engine stop switch to

RUN.

8. Press the starter button.

9. Immediately after the engine starts,

move the choke lever to the mid-

position.

10. Let the engine warm up; then move

the choke lever to the OFF position.

Another way to remember the starting procedure is by using the acronym “BONE-

C.” It stands for:

Basic Operating 

Maneuvers

CAUTION

Do not run the starter motor for
more than eight seconds per start-
ing attempt. The starter motor may
overheat causing severe starter
motor damage. Allow 15 seconds
between starting attempts to allow
the starter motor to cool.

B

O

N

E

C

B

RAKES

O

N

N

EUTRAL

E

NGINE

C

HOKE

2012 300

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

MANCO 7150 Owner'S Manual preview
7150
Brand: MANCO Pages: 57
MANCO 7150 Owner'S/Operator'S Manual preview
7150
Brand: MANCO Pages: 57
Bad Boy 1500 Service Manual preview
1500
Brand: Bad Boy Pages: 132
Club Car DS Gold Standard Owner'S Manual preview
DS Gold Standard
Brand: Club Car Pages: 64
Airstream Pendleton Owner'S Manual preview
Pendleton
Brand: Airstream Pages: 98
MANCO ATV-50 Service Manual preview
ATV-50
Brand: MANCO Pages: 16
Polaris ACE 500 2017 Owner'S Manual For Maintenance And Safety preview
ACE 500 2017
Brand: Polaris Pages: 174
Polaris Hawkeye 2X4 2007 Owner'S Manual preview
Hawkeye 2X4 2007
Brand: Polaris Pages: 141
Polaris 600 RMK Owner'S Manual preview
600 RMK
Brand: Polaris Pages: 133
Polaris RANGER 500 2017 Service Manual preview
RANGER 500 2017
Brand: Polaris Pages: 574
Polaris 2010 Scrambler 4X4 Owner'S Manual preview
2010 Scrambler 4X4
Brand: Polaris Pages: 133
Polaris Sportsman BIG BOSS 6X6 800 EFI Owner'S Manual preview
Sportsman BIG BOSS 6X6 800 EFI
Brand: Polaris Pages: 100
HYOSUNG TE 100 Manual preview
TE 100
Brand: HYOSUNG Pages: 60
Humbaur Steely 1260.400 Mounting Instructions preview
Steely 1260.400
Brand: Humbaur Pages: 4
Kubota RTV 400 CAB Installation & Owner'S Manual preview
RTV 400 CAB
Brand: Kubota Pages: 18
Tomberlin FireFox 620 User Manual preview
FireFox 620
Brand: Tomberlin Pages: 40
Krone LOAD CARRIER Operating Instructions Manual preview
LOAD CARRIER
Brand: Krone Pages: 128
Krone Coil Liner Operating Instructions Manual preview
Coil Liner
Brand: Krone Pages: 192

Brands by name

Popular brands

Load more brands