Arctic Cat 2012 700 i Cruiser Operator'S Manual Download

Page: 156 / 708

Main Table of Contents

Section Table of Contents

Ne xt

Sound Judgment

Be aware of prescription and over-the-counter medications. Drowsi-

ness and impaired judgment can be caused by a wide variety of medi-

cations. The same is true of allergy, cold, flu, and headache

medications. Your physical size and weight can’t protect you... just

one antihistamine tablet can affect your judgment.
If your sense of adventure persuades you to do illegal drugs when

you’re riding your ATV, this is a reality check. Something to think

about—there can be legal consequences that will take away all that

freedom you love. Don’t use alcohol or drugs before or during your

ATV ride.

Your Physical Condition

Being physically exhausted is like

being drunk. Try to do something

that’s detail-oriented when you’re

really tired, and you’ll feel totally

uncoordinated.

Reckless Riding

If you are involved in an ATV accident when you’re speeding, you

have a 25% chance of landing yourself in the hospital. The faster you

go, the more likely you are to destroy your head and internal organs,

and skip the wheelies, jumps, stunts, and any other showboating.

Laws and Regulations

Any police officer will tell you that ignorance of the law is no

defense. Your best defense is to check out your local, state, or provin-

cial ATV laws before riding. It’ll also make sure that you can con-

tinue to ride in your favorite areas. The quickest way to have a land

area closed is by riding over the regulations.

Group Behavior

People occasionally do crazier and riskier things in a group than they

would consider doing by themselves. When you’re ATV riding with

others and things start to get out of hand, decide whether you’re will-

ing to be injured or see your friends injured.

SIPDE

By themselves, none of these safe behaviors and sound judgments

will go very far. But when you put them all together... when you’re

paying attention to how you feel, when you’re monitoring the move-

ments of your ATV, and when you’re constantly evaluating your envi-

ronment, then you’re practicing SIPDE. SIPDE is an acronym that

stands for:

THE EFFECTS OF ALCOHOL*

The Number of Drinks that Impair Mental and Physical Abilities

1-2 DRINKS

Mental processes such as restraint, awareness, concentration, and
judgment affected; reaction time slowed; inability to perform compli-
cated tasks.

3-4 DRINKS

Depth perception, glare recovery, eye movement, and focus
affected; decreased judgment and control.

5+ DRINKS

Coordination deteriorates, loss of critical judgment, and impaired
memory and comprehension.

*According to the ATV Safety Institute.

Don’t ride:

1. When you’re tired

CAN/

DENTIFY

HAZARDS

REDICT

WHAT WILL

HAPPEN

ECIDE

WHAT TO DO

XECUTE

THE

DECISION

2012 XC 450 i

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands