3-9
3
CD818
CD773
Top-Side Components
NOTE: For efficiency, it is preferable to remove and
disassemble only those components which need to
be addressed and to service only those components.
The technician should use discretion and sound
judgment.
NOTE: The engine/transmission does not have to
removed from the frame for this procedure.
Removing Top-Side
Components
A. Valve Cover/Rocker Arms
B. Cylinder Head/Camshaft
NOTE: Remove the spark plug and timing inspec-
tion plug; then using a socket and ratchet, rotate the
crankshaft to top-dead-center of the compression
stroke.
1. Remove the two tappet covers.
CC001D
NOTE: Keep the mounting hardware with the covers
for assembly purposes or thread them back into the
head to keep them separated.
2. Remove the 12 cap screws securing the valve cover
to the head; account for the four rubber washers on
the top side cap screws. Remove the valve cover.
Account for and note the orientation of the cylinder
head plug. Note the location of two alignment pins.
CD205
CD206
AT THIS POINT
To service any one specific component, only limited dis-
assembly of components may be necessary. Note the
AT THIS POINT information in each sub-section.
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
