2-13
2
4. Verify that the brakelight illuminates when the hand
lever is compressed or the brake pedal is depressed.
Checking/Replacing
V-Belt
REMOVING
1. Remove the right-side footrest (see Section 8).
2. Remove the cap screws securing the V-belt cover
noting the location of the different-lengthed cap
screws for installing purposes; then using a rubber
mallet, gently tap on the cover tabs to loosen the
cover. Remove the cover.
CD078
3. Remove the nut securing the movable drive face;
then remove the face. Account for the flat washer
and spacer.
NOTE: Keep the drive face plate in contact with the
drive face when removing or installing the drive face
to prevent the rollers from falling out.
CD963
CD966A
4. Install one of the CVT cover cap screws into the
driven pulley fixed face; then turn the cap screw
clockwise to spread the pulley faces. Remove the
V-belt.
GZ076
GZ085
INSTALLING
1. Place the V-belt into position on the driven pulley
and over the front shaft.
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
