Instruction manual –AQ F210 Feeder Protection IED
247 (292
)
7
C
ONSTRUCTION AND INSTALLATION
AQ-F210 Feeder Protection IED is a member of modular and scalable AQ-2xx series and
includes four configurable modular add-on card slots. As a standard configuration in the
IED are included CPU, IO and Power supply module. In the figure below is presented non-
optioned model (AQ-F210-XX-AAAA) and fully optioned model (AQ-F210-XX-BBBC) of the
AQ-F210 Feeder Protection IED.
Figure 7-1 Modular construction of AQ-F210 Feeder Protection IED
AQ-F210 modular structure allows scalable solutions for different application requirements.
In any of the non-standard configured slot “A”, “C”, “E” and “F” can be ordered with any
available add-on module which can be binary IO module, integrated Arc –protection or any
special module provided. Only differentiating factor in the device scalability is considering
the “E” slot which supports also communication options.
In case add-on module is inserted to the IED the start-up scan will search of the modules
according to the type designation code, if the module location or content is differing from
the expected the IED will not take additional modules into account and will issue a
configuration error. For a field upgrade this means that the add-on module has to be ordered
from Arcteq Ltd. or representative who shall provide the add-on module with corresponding
unlocking code in order the device to be operating correctly after upgrading the hardware
configuration. This means also that the module location cannot be changed without
updating the device configuration data, for this case also unlocking code is needed.