Ports Used by the Appliance
Node protected by UDP Linux remotely
The following port is required for backup and other jobs when you have a LAN envir-
onment:
Port
#
Port
Type
Initiated
by
Listening
Process
Description
22
SSH ser-
vice
Arcserve UDP Linux 3rd party dependency. Specifies the
default for the SSH service, however, you can change
this port. This port is required for both incoming and
outgoing communications.
*Port sharing is supported for replication jobs. All data on different ports can be forwarded
to port 8014 (default port for the Arcserve UDP Server, which can be modified during install-
ation). When a replication job runs between two recovery point Servers across WAN, only
port 8014 needs to be opened.
Similarly, for remote replications, the Remote administrator needs to open or forward port
8014 (for data replication) and port 8015 (default port for the Arcserve UDP console, which
can be modified during installation) for local recovery point Servers to obtain the assigned
replication plan.
Chapter 2: Introducing the Arcserve Appliance 57
