Arcserve 7100, User Manual

Page: 55 / 260

Controls and Indicators
Rear Panel 9072DR-9504DR
The rear panel of the Arcserve Appliance contains the power supplies, cable con-
nections, and ports for the appliance. The following table describes these items:
Number Control / Indicator Icon Description
1
Full-height PCIe expan-
sion card slot (3)
NA
The PCIe expansion card slot (riser 1) con-
nects up to three full-height PCIe expansion
cards to the system. For more information,
see
link .
2
Half-height PCIe
expansion card slot
NA
The PCIe expansion card slot (riser 2) con-
nects one half-height PCIe expansion cards
to the system. For more information, see
link .
3 Rear handle NA
The rear handle can be removed to enable
any external cabling of PCIe cards that are
installed in the PCIe expansion card slot 6.
4
Full-height PCIe expan-
sion card slot (2)
NA
The PCIe expansion card slot (riser 2) con-
nects up to two full-height PCIe expansion
cards to the system. For more information,
see
link .
5
Full-height PCIe expan-
sion card slot (2)
NA
The PCIe expansion card slot (riser 3) con-
nects up to two full-height PCIe expansion
cards to the system. For more information,
see
link .
6 Power supply unit (2) NA For more information, see link .
7 NIC ports
The NIC ports that are integrated on the net-
work daughter card (NDC) provide network
connectivity. For more information about
the supported configurations, see
link .
Chapter 2: Introducing the Arcserve Appliance 47