Arcserve 7100, User Manual

Page: 53 / 260

Controls and Indicators
Rear Panel 9012-9048
The rear panel of the Arcserve Appliance contains the power supplies, cable con-
nections, and ports for the appliance. The following table describes these items:
Number Control / Indicator Icon Description
1 Serial port
Use the serial port to connect a serial device to
the system. For more information, see
link
.
2
iDRAC9 dedicated net-
work port
Use the iDRAC9 dedicated network port to
securely access the embedded iDRAC on a sep-
arate management network. For more inform-
ation, see
link
.
3 Ethernet ports (2)
Use the Ethernet ports to connect Local Area
Networks (LANs) to the system. For more
information, see
link .
4 Full height riser slot
Use the card slots to connect full-height PCIe
expansion cards on full height riser.
5
Power supply unit
(PSU) For more information about the PSU con-
figurations, see
link .
6
Power supply unit
(PSU) For more information about the PSU con-
figurations, see
link .
7 LOM riser ports (2)
For more information about the PSU con-
figurations, see
link .
8 USB 3.0 port (2)
Use the USB 3.0 port to connect USB devices
to the system. These ports are 4-pin, USB 3.0-
compliant.
9 VGA port
Use the VGA port to connect a display to the
system. For more information, see
link
.
10 CMA power port
The Cable Management Arm (CMA) power
port enables you to connect to the CMA.
11
System identification
button
Press the system ID button:
l
To locate a particular system within a
Chapter 2: Introducing the Arcserve Appliance 45