Setting-up to Perform Linux Instant VM Job to Local Appliance Hyper-V
Setting-up to Perform Linux Instant VM Job to Local
Appliance Hyper-V
Using Arcserve Appliance, you can set the network to perform Linux instant VM job
on local Appliance Hyper-V.
Follow these steps:
1. Open Hyper-V manger.
2. Create a new external virtual network switch.
3. Open Routing and Remote Access and click
Disable Routing and Remote
Access
.
4. Run the following command with PowerShell to reconfigure Routing and
Remote Access for the newly added virtual network switch in step 1 using
DOS command line:
C:\Program Files\Arcserve\Unified Data Pro-
tection\Engine\BIN\Appliance>powershell .\Rebuild-VMSwitch.ps1
Note:
The Linux Backup Server
Linux-BackupSvr
is rebooted during the pro-
cess.
5. To perform Linux instant VM job to local Hyper-V, select the newly added
virtual network switch created.
Now, you can perform Linux instant VM job to local Appliance Hyper-V successfully.
112 Arcserve Appliance User Guide
