Add Nodes to a Plan
Add Nodes by Hostname/IP Address
You can manually enter the IP address or the hostname of the address to add a
node to a plan. Use this method when you have a few nodes to add, however, you
can add multiple nodes one at a time. Arcserve UDP Agent (Windows) is installed
on these nodes.
Follow these steps:
1. On the
Add Nodes by Hostname/IP address
dialog, enter the following
details:
Hostname/IP Address
Specifies the hostname or IP address of the source node.
User name
Specifies the user name of the node having administrator privileges.
Password
Specifies the user password.
Description
Specifies any description to identify the node.
Cancel Plan Creation
Chapter 6: Working with Arcserve Appliance 95
