arcelik BEKO COSMOS Service Handbook Download Page 44

Page: 44 / 274

SBS COSMOS REFRIGERATOR

07.11.2018 / REV NO: 01

Sensitivity: Public

When any key is pressed, control board version info is shown on the FF compartment and the
revision info is shown on the FRZ compartment.

NOTE: To see updated version revision info, control board and display technical drawings
should be checked.

Step 3:

When any button is pressed, sensor is started to be shown. Sensor display is as

follows.

FH: Fridge Air
FE:Fridge Eva
rH; Freezer Air

rE: Freezer Eva

IS: Icematic Sensor

CA:0 Fridge

CA: 1 Freeze

View 1 (Value-Sensor) :

Sensor value and sensor code

FRZ compartment -sensor
value, FF compartment:

FRZ compartment sensor value,
FF compartment:

View 2 (Value-Cabin) :

Sensor value and Cabin abbriv. "CA"

View 3 (Value-Cabin Code) :

Sensor value and cabin code

CA: Cabin

Summary of Contents for BEKO COSMOS



















































































































































































































































































Search results

Summary of Contents for BEKO COSMOS

Reviews:

arcelik BEKO COSMOS, Service Handbook, Page: 44 / 274

Search results

Summary of Contents for BEKO COSMOS

Reviews: