manualshive.com logo in svg

arcelik BEKO COSMOS, Service Handbook, Page: 115 / 274

Share
Download
arcelik BEKO COSMOS Service Handbook Download Page 115

     

SBS COSMOS REFRIGERATOR

 

07.11.2018 / REV NO: 01

 

 

 

117 

 

Sensitivity: Public 

14.3.  Compressor is not running 

 
 
 

 

 

 

 

 
 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

POINTS TO BE 
CONSIDERED 

Refrigerator will start running 
approximately after 6 minutes. 

This is normal for a full-automatically 
defrosting refrigerator. Defrosting 
cycle occurs periodically. 

The fridge is in defrost cycle.

Make sure that the plug is 

properly fit into the socket. 

Compress
or is not 
running. 

CAUSES 

Protective thermic of the compressor will 

blow out during sudden power failures or 

plug-out plug-ins as the refrigerant pres 

in the cooling system of the refrigerator 

has not been balanced yet.

Your refrigerator is not plugged 
in the socket. 

Summary of Contents for BEKO COSMOS



















































































































































































































































































Reviews:

No comments