arcelik 9102 PMG, User Manual

Page: 32 / 48

EN / 32
The door will be locked if Remote
Control Function is selected. In order
to open the door you must deactiv-
ate Remote Start Function by either
pressing the Remote Start button or
changing the programme position.
Opening the loading door in case of
power failure:
In case of power failure, you can use
the loading door emergency handle
under the pump filter cap to open
the loading door manually.
To avoid any water overflow before
opening the loading door, make sure
there is no water left inside the ma-
chine.
a. Turn off and unplug the appliance.
b. Open the pump filter lid.
c. Pull down the loading door emergency
handle with a tool and release. Then
open the loading door.
d. If the loading door does not open then
repeat the previous step.
6.12 Changing the Selections After
Programme has Started
Adding laundry after the programme has
started :
If the water level in the machine is suitable
when you press Start/Pause button, the
door lock will be deactivated and the door
will open, allowing you to add garments. The
door lock symbol on the display goes off
when the door lock is deactivated. After
adding garments, close the door and press
Start/Pause button once again to resume
the washing cycle.
If the water level in the machine is not suit-
able when you press Start/Pause button, the
door lock cannot be deactivated and the
door lock symbol on the display remains on.
If the temperature of the water inside
the machine is above 50°C, you
cannot deactivate the door lock for
safety reasons, even if the water
level is suitable.