arcelik 9102 PMG, User Manual

Page: 30 / 48

EN / 30
• Soaking
This function can be selected by pressing
and holding the related auxiliary function but-
ton for 3 seconds.
The Soaking in Water auxiliary function en-
sures that the stains that have penetrated
into the laundry are cleaned better by soak-
ing the laundry in detergent water before the
washing process starts.
• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume from where it
has stopped.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.
To activate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as “3-2-1" on the display is over, Child Lock
symbol appears on the display. When this
warning is displayed, you can release the
Auxiliary Function button 3.
To deactivate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as “3-2-1" on the display is over, Child Lock
symbol disappears.
• Bluetooth
You can use the bluetooth connection func-
tion to pair your machine with your smart
device. This way, you can use your smart
device to get information about your ma-
chine and control it.
To activate bluetooth connection:
Press and hold Remote Control function but-
ton for 3 seconds. Countdown “3-2-1” will
be displayed, and then Bluetooth icon will
appear on the display. Release Remote Con-
trol function button. The bluetooth icon will
flash while the product is pairing with smart
device. If connection is successful, icon will
remain on.
To deactivate bluetooth connection:
Press and hold Remote Control function but-
ton for 3 seconds. Countdown “3-2-1” will
be displayed, and then Bluetooth icon will
disappears on the display.
First setup of the HomeWhiz applic-
ation must be complete for the
bluetooth connection to be activ-
ated. After setup, pressing the re-
mote control function button while
the knob is at Download Pro-
gramme/Remote Control position
will automatically activate the
bluetooth connection.
6.9 End Time
Time display
When the end time function is selected, the
remaining time until the programme starts is
shown in hours such as 1h, 2h, and the re-
maining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
Programme duration may differ from
the values in section "Programme
and consumption table" depending
on the water pressure, water hard-
ness and temperature, ambient tem-
perature, amount and the type of
laundry, auxiliary functions selected
and the changes at the mains
voltage.