Safety and environment instructions
5/36EN
Refrigerator / User Guide
•
The product shall be installed in a
dry and ventilated environment.
Do not keep carpets, rugs or similar
floor covers under the product.
This may cause risk of fire as a
result of inadequate ventilation!
•
Do not block or cover ventilation
holes. Otherwise, power
consumption may be increased
and damage to your product may
occur.
•
Do not connect the product to
supply systems such as solar
power supplies. Otherwise,
damage to your product may occur
as a result of the abrupt voltage
fluctuations!
•
The more refrigerant a
refrigerator contains, the bigger
its installation room shall be. In
very small rooms, a flammable
gas-air mixture may occur in case
of a gas leak in the cooling system.
At least 1 m³ of volume is required
for each 8 grams of refrigerant.
The amount of the refrigerant
available in your product is
specified in the Type Label.
•
The installation place of the
product shall not be exposed to
direct sunlight and it shall not be in
the vicinity of a heat source such
as stoves, radiators, etc.
If you cannot prevent installation of the
product in the vicinity of a heat source,
you shall use a suitable insulation plate
and the minimum distance to the heat
source shall be as specified below.
- At least 30 cm away from heat
sources such as stoves, heating units and
heaters, etc.,
- And at least 5 cm away from electric
ovens.
•
Your product has the protection
class of I. Plug the product in a
grounded socket that conforms
with the Voltage, Current and
Frequency values specified in the
type label. The socket outlet shall
be equipped with a fuse with a
rating of 10 A – 16 A. Our company
shall not be responsible for the
damages that shall be incurred as
a result of operating the product
without ensuring ground and
electrical connections made as per
local or national regulations.
•
The product’s power cable must
be unplugged during installation.
Otherwise, risk of electric shock and
injury may occur!
•
Do not plug the product to loose, broken,
dirty, greasy sockets or sockets that has
come out their seats or sockets with a
risk of water contact.
•
Place the power cord and hoses (if ava-
ilable) of the product so that they shall
not cause a risk of tripping over.
•
Penetration of humidity to live parts
or to the power cord may cause short
circuit. Thus, do not use the product in
humid environments or in areas where
water may splash (e.g. garage, laundry
room, etc.) If the refrigerator is wet by
water, unplug it and contact an authori-
zed service.
•
Do not connect your refrigerator to po-
wer saving devices. These systems are
harmful for the product.
1.6
Operational safety
•
Do not use chemical solvents on the
product. These materials contain an
explosion risk.
•
In case of a failure of the product, unp-
lug it and do not operate until it is repa-
ired by the authorized service. There is a
risk of electric shock!