Service Support Spirit
Unique Solution
WWW.ARCBRO.COM
49
6.2 Files in the U Disk
In the code interface, press key
【
F2
】
to go for U Disk interface.
In the U Disk interface, choose the corresponding cutting code, press
【
F6
】
, the system
will save this code into the internal documents.
Note: When you open a file on U disk , you must save it as the local machine code before
you start cutting. When saved the U disk documents, file name automatically memory, shown
as Fig 6.3:
Fig 6.3 save U disk files
When input file name, if you do not want to change the file name, you can be directly
press
【
Enter
】
to preserved; or modify the file name and then press
【
Enter
】
to save. If
the same named file has already exited, the system prompts:
